diff --git a/translations/base-kor.yaml b/translations/base-kor.yaml
index fe7666f2..1ea855c5 100644
--- a/translations/base-kor.yaml
+++ b/translations/base-kor.yaml
@@ -182,13 +182,12 @@ dialogs:
title: 세이브 파일 이름 설정
desc: 여기에서 세이브 파일의 이름을 바꿀 수 있습니다.
tutorialVideoAvailable:
- title: Tutorial Available
- desc: There is a tutorial video available for this level! Would you like to
- watch it?
+ title: 활성화된 튜토리얼
+ desc: 현재 레벨에서 사용할 수 있는 튜토리얼 비디오가 있습니다! 보시겠습니까?
tutorialVideoAvailableForeignLanguage:
- title: Tutorial Available
- desc: There is a tutorial video available for this level, but it is only
- available in English. Would you like to watch it?
+ title: 활성화된 튜토리얼
+ desc: 현재 레벨에서 사용할 수 있는 튜토리얼 비디오가 있습니다! 허나 영어로만
+ 제공될 것입니다. 보시겠습니까?
ingame:
keybindingsOverlay:
moveMap: 이동
@@ -279,30 +278,28 @@ ingame:
1_3_expand: "이 게임은 방치형 게임이 아닙니다! 더 많은 추출기와 벨트를 만들어 지정된 목표를 빨리
달성하세요.
팁: SHIFT 키를 누른 상태에서는 빠르게 배치할 수
있고, R 키를 눌러 회전할 수 있습니다."
- 2_1_place_cutter: "Now place a Cutter to cut the circles in two
- halves!
PS: The cutter always cuts from top to
- bottom regardless of its orientation."
- 2_2_place_trash: The cutter can clog and stall!
Use a
- trash to get rid of the currently (!) not
- needed waste.
- 2_3_more_cutters: "Good job! Now place 2 more cutters to speed
- up this slow process!
PS: Use the 0-9
- hotkeys to access buildings faster!"
- 3_1_rectangles: "Now let's extract some rectangles! Build 4
- extractors and connect them to the hub.
PS:
- Hold SHIFT while dragging a belt to activate
- the belt planner!"
- 21_1_place_quad_painter: Place the quad painter and get some
- circles, white and
- red color!
- 21_2_switch_to_wires: Switch to the wires layer by pressing
- E!
Then connect all four
- inputs of the painter with cables!
- 21_3_place_button: Awesome! Now place a Switch and connect it
- with wires!
- 21_4_press_button: "Press the switch to make it emit a truthy
- signal and thus activate the painter.
PS: You
- don't have to connect all inputs! Try wiring only two."
+ 2_1_place_cutter: "이제 절단기를 배치하여 원형 도형을 둘로 자르세요!
+ 추신: 절단기는 방향에 관계 없이 항상 수직으로 자릅니다."
+ 2_2_place_trash: 절단기가 막히거나 멈출 수 있습니다!
+ 휴지통을 사용하여 현재 필요없는 쓰레기 도형 (!)을
+ 제거하세요.
+ 2_3_more_cutters: "잘하셨습니다! 느린 처리 속도를 보완하기 위해 절단기를 두 개
+ 이상 배치해보세요!
추신: 상단 숫자 단축키 (0~9)를 사용하여
+ 건물을 빠르게 선택할 수 있습니다!
+ 3_1_rectangles: "이제 사각형 도형을 추출해 볼까요! 추출기 네 개를
+ 배치하고 허브와 연결하세요.
추신: 긴 벨트 한 줄을
+ 간단히 만들려면 SHIFT 키를 누른 채 드래그하세요!"
+ 21_1_place_quad_painter: 4단 색칠기를 배치하여 흰색과
+ 빨간색이 칠해진 원형
+ 도형을 만들어보세요!
+ 21_2_switch_to_wires: E 키를 눌러 전선 레이어
+ 로 전환하세요!
그 후 색칠기의 네 입력 부분을
+ 모두 케이블로 연결하세요!
+ 21_3_place_button: 훌륭해요! 이제 스위치를 배치하고 전선으로
+ 연결하세요!
+ 21_4_press_button: "스위치를 눌러 참 신호를 내보내
+ 색칠기를 활성화하세요. 추신: 모든 입력을 연결할 필요는 없습니다!
+ 지금은 두 개만 연결하세요."
colors:
red: 빨간색
green: 초록색
@@ -314,13 +311,13 @@ ingame:
black: 검은색
uncolored: 회색
shapeViewer:
- title: 층
+ title: 레이어
empty: 비었음
copyKey: 키 복사하기
connectedMiners:
one_miner: 추출기 1 개
n_miners: 추출기 개
- limited_items: 개로 제한됨
+ limited_items: 까지가 한계임
watermark:
title: 체험판 버전
desc: 정식 버전의 장점을 보려면 여기를 클릭하세요!
@@ -652,13 +649,12 @@ storyRewards:
- 평소처럼 게임을 진행합니다.
어떤 방식으로든, 재미있게 게임을 플레이해주시길 바랍니다!
reward_wires_painter_and_levers:
title: 전선과 4단 색칠기
- desc: "You just unlocked the Wires Layer: It is a separate
- layer on top of the regular layer and introduces a lot of new
- mechanics!
For the beginning I unlocked you the Quad
- Painter - Connect the slots you would like to paint with on
- the wires layer!
To switch to the wires layer, press
- E.
PS: Enable hints in
- the settings to activate the wires tutorial!"
+ desc: "전선 레이어가 잠금 해제되었습니다! 전선 레이어는
+ 일반 레이어 위에 존재하는 별도의 레이어로, 이를 통한 다양하고 새로운
+ 메커니즘을 소개하겠습니다!
우선 4단 색칠기가
+ 잠금 해제되었습니다. 전선 레이어에서 색칠하고 싶은 슬롯에 전선을 연결하세요!
+ 전선 레이어로 전환하려면 E 키를 누르세요.
+ 추신: 설정에서 힌트를 활성화하여 전선 튜토리얼을 활성화하세요!"
reward_filter:
title: 아이템 선별기
desc: 아이템 선별기가 잠금 해제되었습니다! 전선 레이어의 신호와 일치하는지에 대한 여부로 아이템을 위쪽