diff --git a/translations/base-cz.yaml b/translations/base-cz.yaml index 35429076..865608f8 100644 --- a/translations/base-cz.yaml +++ b/translations/base-cz.yaml @@ -334,15 +334,15 @@ ingame: cyan: Tyrkysová white: Bílá uncolored: Bez barvy - black: Black + black: Černá shapeViewer: title: Vrstvy empty: Prázdné copyKey: Copy Key connectedMiners: - one_miner: 1 Miner - n_miners: Miners - limited_items: Limited to + one_miner: 1 Extraktor + n_miners: Extraktorů + limited_items: Limit je shopUpgrades: belt: name: Pásy, distribuce & tunely @@ -400,8 +400,8 @@ buildings: name: Rotor (opačný) description: Otáčí tvary o 90 stupňů proti směru hodinových ručiček rotate180: - name: Rotate (180) - description: Rotates shapes by 180 degrees. + name: Rotor (180) + description: Otáčí tvary o 180 stupňů. stacker: default: name: Kombinátor @@ -433,114 +433,101 @@ buildings: name: Kabel description: Dovoluje přenos energie. second: - name: Wire - description: Transfers signals, which can be items, colors or booleans (1 / 0). - Different colored wires do not connect. + name: Kabel + description: Dovoluje přenos energie. balancer: default: - name: Balancer - description: Multifunctional - Evenly distributes all inputs onto all outputs. + name: Vyvažovač + description: Multifunkční - Rozděluje vstupy do výstupy. merger: - name: Merger (compact) - description: Merges two conveyor belts into one. + name: Spojka (kompaktní) + description: Spojí dva pásy do jednoho. merger-inverse: - name: Merger (compact) - description: Merges two conveyor belts into one. + name: Spojka (kompaktní) + description: Spojí dva pásy do jednoho. splitter: - name: Splitter (compact) - description: Splits one conveyor belt into two. + name: Rozdělovač (kompaktní) + description: Rozdělí jeden pás na dva. splitter-inverse: - name: Splitter (compact) - description: Splits one conveyor belt into two. + name: Rozdělovač (kompaktní) + description: Rozdělí jeden pás na dva. storage: default: - name: Storage - description: Stores excess items, up to a given capacity. Prioritizes the left - output and can be used as an overflow gate. + name: Sklad + description: Skladuje věci navíc až do naplnění kapacity. Může být použit na skladová ní surovin navíc. wire_tunnel: default: - name: Wire Crossing - description: Allows to cross two wires without connecting them. + name: Křížení kabelů + description: Umožňuje křížení dvou kabeů bez jejich spojení. constant_signal: default: - name: Constant Signal - description: Emits a constant signal, which can be either a shape, color or - boolean (1 / 0). + name: Konstantní signál + description: Vydává konstantní signál, který může mít tvar, barvu nebo logickou hodnotu (1 / 0). lever: default: - name: Switch - description: Can be toggled to emit a boolean signal (1 / 0) on the wires layer, - which can then be used to control for example an item filter. + name: Přepínač + description: Lze přepínat, aby vydával signál (1/0) na vrstvě vodičů, pomocí kterého lze například + ovládat filtr tvarů a barev. logic_gate: default: name: AND Gate - description: Emits a boolean "1" if both inputs are truthy. (Truthy means shape, - color or boolean "1") + description: Vysílá signál "1" pokud oba vstupy vysílají signál. not: name: NOT Gate - description: Emits a boolean "1" if the input is not truthy. (Truthy means - shape, color or boolean "1") + description: Vysílá signál "1" pokud oba vstupy nevysílají signál. xor: name: XOR Gate - description: Emits a boolean "1" if one of the inputs is truthy, but not both. - (Truthy means shape, color or boolean "1") + description: Vysílá signál "1" pokud jeden vstup vysílá signál, ale druhý vstup nevysílá signál. or: name: OR Gate - description: Emits a boolean "1" if one of the inputs is truthy. (Truthy means - shape, color or boolean "1") + description: Vysílá signál "1" pokud jeden vstup vysílá signál. transistor: default: - name: Transistor - description: Forwards the bottom input if the side input is truthy (a shape, - color or "1"). + name: Tranzistor + description: Přeposílá spodní vstup, pokud boční vstup vysílá signál. mirrored: - name: Transistor - description: Forwards the bottom input if the side input is truthy (a shape, - color or "1"). + name: Tranzistor + description: Přeposílá spodní vstup, pokud boční vstup vysílá signál. filter: default: - name: Filter - description: Connect a signal to route all matching items to the top and the - remaining to the right. Can be controlled with boolean signals - too. + name: Filtr + description: Připojte signál k třídění tvarů a barev. display: default: name: Display - description: Connect a signal to show it on the display - It can be a shape, - color or boolean. + description: Připojte signál a zobrazte jej na displeji - může to být tvar nebo + barva. reader: default: - name: Belt Reader - description: Allows to measure the average belt throughput. Outputs the last - read item on the wires layer (once unlocked). + name: Čtečka pásů + description: Umožňuje měřit průměrnou propustnost pásu. Výstup čte poslední + položku ve vrstvě kabelů. analyzer: default: - name: Shape Analyzer - description: Analyzes the top right quadrant of the lowest layer of the shape - and returns its shape and color. + name: Analyzátor tvarů + description: Analyzuje pravou horní část nejnižší vrstvy tvaru a vrací tvar a barvu. comparator: default: - name: Compare - description: Returns boolean "1" if both signals are exactly equal. Can compare - shapes, items and booleans. + name: Porovnávač + description: Vrátí signál „1“, pokud jsou oba signály přesně stejné. Může srovnávat + tvary, předměty a signály. virtual_processor: default: - name: Virtual Cutter - description: Virtually cuts the shape into two halves. + name: Virtuální pila + description: Virtuálně rozřízne tvar svisle na dvě části. rotater: - name: Virtual Rotater - description: Virtually rotates the shape, both clockwise and counter-clockwise. + name: Virtuální rotor + description: Virtuálně Otáčí tvary o 90 stupňů po směru hodinových ručiček. unstacker: - name: Virtual Unstacker - description: Virtually extracts the topmost layer to the right output and the - remaining ones to the left. + name: Virtuální extrahátor + description: Virtuálně extrahuje nejvyšší vrstvu do pravého výstupu a zbývající do levé. stacker: - name: Virtual Stacker - description: Virtually stacks the right shape onto the left. + name: Virtuální kombinátor + description: Virtuálně Spojí tvary dohromady. Pokud nemohou být spojeny, pravý tvar je + položen na levý. painter: - name: Virtual Painter - description: Virtually paints the shape from the bottom input with the shape on - the right input. + name: Virtual barvič + description: Virtuálně obarví celý tvar v levém vstupu barvou z pravého vstupu. storyRewards: reward_cutter_and_trash: title: Řezání tvarů