Merge hekate 5.1.0 changes

common/memory_map.h

@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2019 CTCaer
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _MEMORY_MAP_H_
+#define _MEMORY_MAP_H_
+
+//#define IPL_STACK_TOP  0x4003FF00
+/* --- BIT/BCT: 0x40000000 - 0x40003000 --- */
+/* ---     IPL: 0x40003000 - 0x40028000 --- */
+#define IPL_LOAD_ADDR     0x40003000
+#define  IPL_SZ_MAX          0x20000 // 128KB.
+//#define IRAM_LIB_ADDR     0x4002B000
+#define SDRAM_PARAMS_ADDR 0x40030000 // SDRAM extraction buffer during sdram init.
+#define CBFS_DRAM_EN_ADDR 0x4003e000 // u32.
+
+/* --- DRAM START --- */
+#define DRAM_START     0x80000000
+/* Do not write anything in this area */
+#define NYX_LOAD_ADDR  0x81000000
+#define  NYX_SZ_MAX     0x1000000
+/* Stack theoretical max: 220MB */
+#define IPL_STACK_TOP  0x90010000
+#define IPL_HEAP_START 0x90020000
+#define  IPL_HEAP_SZ   0x24FE0000 // 592MB.
+/* --- Gap: 0xB5000000 - 0xB5FFFFFF --- */
+
+// SDMMC DMA buffers
+#define SDXC_BUF_ALIGNED   0xB6000000
+#define MIXD_BUF_ALIGNED   0xB7000000
+#define EMMC_BUF_ALIGNED   MIXD_BUF_ALIGNED
+#define  SDMMC_DMA_BUF_SZ   0x1000000 // 16MB (4MB currently used).
+#define SDMMC_UPPER_BUFFER 0xB8000000
+#define  SDMMC_UP_BUF_SZ    0x8000000 // 128MB.
+
+// Virtual disk / Chainloader buffers.
+#define RAM_DISK_ADDR     0xC1000000
+#define  RAM_DISK_SZ      0x20000000
+//#define DRAM_LIB_ADDR    0xE0000000
+/* --- Chnldr: 252MB 0xC03C0000 - 0xCFFFFFFF --- */ //! Only used when chainloading.
+/* ---    Gap: 464MB 0xD0000000 - 0xECFFFFFF --- */
+
+// Nyx buffers.
+#define NYX_STORAGE_ADDR 0xED000000
+#define NYX_RES_ADDR     0xEE000000
+
+// Framebuffer addresses.
+#define IPL_FB_ADDRESS   0xF0000000
+#define  IPL_FB_SZ         0x384000 // 720 x 1280 x 4.
+#define LOG_FB_ADDRESS   0xF0400000
+#define  LOG_FB_SZ         0x334000 // 1280 x 656 x 4.
+#define NYX_FB_ADDRESS   0xF0800000
+#define  NYX_FB_SZ         0x384000 // 1280 x 720 x 4.
+
+// Nyx LvGL buffers.
+#define NYX_LV_VDB_ADR   0xF0C00000
+#define  NYX_FB_SZ         0x384000 // 1280 x 720 x 4.
+#define NYX_LV_MEM_ADR   0xF1000000
+#define  NYX_LV_MEM_SZ    0x8000000
+
+// NX BIS driver sector cache.
+#define NX_BIS_CACHE_ADDR 0xF9000000
+#define  NX_BIS_CACHE_SZ      0x8800
+/* --- Gap: 111MB 0xF9008800 - 0xFFFFFFFF --- */
+
+// #define EXT_PAYLOAD_ADDR    0xC03C0000
+// #define RCM_PAYLOAD_ADDR    (EXT_PAYLOAD_ADDR + ALIGN(PATCHED_RELOC_SZ, 0x10))
+// #define COREBOOT_ADDR       (0xD0000000 - 0x100000)
+
+// NYX
+// #define EXT_PAYLOAD_ADDR    0xC0000000
+// #define RCM_PAYLOAD_ADDR    (EXT_PAYLOAD_ADDR + ALIGN(PATCHED_RELOC_SZ, 0x10))
+// #define COREBOOT_ADDR       (0xD0000000 - 0x100000)
+
+#endif