Update to hekate bdk 5.5.6
This commit is contained in:
shchmue
parent
93909f149e
commit
a7712b173c
95 changed files with 2720 additions and 1684 deletions
|
|
@ -1,8 +1,7 @@
|
|||
/*
|
||||
* Defining registers address and its bit definitions of MAX77620 and MAX20024
|
||||
*
|
||||
* Copyright (c) 2016 NVIDIA CORPORATION. All rights reserved.
|
||||
* Copyright (c) 2019 CTCaer
|
||||
* Copyright (c) 2019-2020 CTCaer
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
|
|
@ -30,24 +29,33 @@
|
|||
#define MAX77620_CNFGGLBL1_LBHYST_200 (1 << 4)
|
||||
#define MAX77620_CNFGGLBL1_LBHYST_300 (2 << 4)
|
||||
#define MAX77620_CNFGGLBL1_LBHYST_400 (3 << 4)
|
||||
#define MAX77620_CNFGGLBL1_LBHYST (BIT(5) | BIT(4))
|
||||
#define MAX77620_CNFGGLBL1_MPPLD BIT(6)
|
||||
#define MAX77620_CNFGGLBL1_LBDAC_EN BIT(7)
|
||||
|
||||
#define MAX77620_REG_CNFGGLBL2 0x01
|
||||
#define MAX77620_REG_CNFGGLBL3 0x02
|
||||
#define MAX77620_WDTC_MASK 0x3
|
||||
#define MAX77620_WDTEN BIT(2)
|
||||
#define MAX77620_WDTSLPC BIT(3)
|
||||
#define MAX77620_WDTOFFC BIT(4)
|
||||
#define MAX77620_TWD_MASK 0x3
|
||||
#define MAX77620_TWD_2s 0x0
|
||||
#define MAX77620_TWD_16s 0x1
|
||||
#define MAX77620_TWD_64s 0x2
|
||||
#define MAX77620_TWD_128s 0x3
|
||||
#define MAX77620_WDTEN BIT(2)
|
||||
#define MAX77620_WDTSLPC BIT(3)
|
||||
#define MAX77620_WDTOFFC BIT(4)
|
||||
#define MAX77620_GLBL_LPM BIT(5)
|
||||
#define MAX77620_I2CTWD_MASK 0xC0
|
||||
#define MAX77620_I2CTWD_DISABLED 0x00
|
||||
#define MAX77620_I2CTWD_1_33ms 0x40
|
||||
#define MAX77620_I2CTWD_35_7ms 0x80
|
||||
#define MAX77620_I2CTWD_41_7ms 0xC0
|
||||
|
||||
#define MAX77620_REG_CNFGGLBL3 0x02
|
||||
#define MAX77620_WDTC_MASK 0x3
|
||||
|
||||
#define MAX77620_REG_CNFG1_32K 0x03
|
||||
#define MAX77620_CNFG1_PWR_MD_32K_MASK 0x3
|
||||
#define MAX77620_CNFG1_32K_OUT0_EN BIT(2)
|
||||
#define MAX77620_CNFG1_32KLOAD_MASK 0x30
|
||||
#define MAX77620_CNFG1_32K_OK BIT(7)
|
||||
|
||||
#define MAX77620_REG_CNFGBBC 0x04
|
||||
#define MAX77620_CNFGBBC_ENABLE BIT(0)
|
||||
|
|
@ -64,6 +72,7 @@
|
|||
#define MAX77620_CNFGBBC_RESISTOR_6K (3 << MAX77620_CNFGBBC_RESISTOR_SHIFT)
|
||||
|
||||
#define MAX77620_REG_IRQTOP 0x05
|
||||
#define MAX77620_REG_IRQTOPM 0x0D
|
||||
#define MAX77620_IRQ_TOP_ONOFF_MASK BIT(1)
|
||||
#define MAX77620_IRQ_TOP_32K_MASK BIT(2)
|
||||
#define MAX77620_IRQ_TOP_RTC_MASK BIT(3)
|
||||
|
|
@ -73,28 +82,53 @@
|
|||
#define MAX77620_IRQ_TOP_GLBL_MASK BIT(7)
|
||||
|
||||
#define MAX77620_REG_INTLBT 0x06
|
||||
#define MAX77620_REG_IRQTOPM 0x0D
|
||||
#define MAX77620_REG_INTENLBT 0x0E
|
||||
#define MAX77620_IRQ_GLBLM_MASK BIT(0)
|
||||
#define MAX77620_IRQ_TJALRM2_MASK BIT(1)
|
||||
#define MAX77620_IRQ_TJALRM1_MASK BIT(2)
|
||||
#define MAX77620_IRQ_LBM_MASK BIT(3)
|
||||
|
||||
#define MAX77620_REG_IRQSD 0x07
|
||||
#define MAX77620_REG_IRQ_LVL2_L0_7 0x08
|
||||
#define MAX77620_REG_IRQ_LVL2_L8 0x09
|
||||
#define MAX77620_REG_IRQ_LVL2_GPIO 0x0A
|
||||
#define MAX77620_REG_ONOFFIRQ 0x0B
|
||||
#define MAX77620_REG_NVERC 0x0C
|
||||
|
||||
#define MAX77620_REG_INTENLBT 0x0E
|
||||
#define MAX77620_GLBLM_MASK BIT(0)
|
||||
|
||||
#define MAX77620_REG_IRQMASKSD 0x0F
|
||||
#define MAX77620_IRQSD_PFI_SD3 BIT(4)
|
||||
#define MAX77620_IRQSD_PFI_SD2 BIT(5)
|
||||
#define MAX77620_IRQSD_PFI_SD1 BIT(6)
|
||||
#define MAX77620_IRQSD_PFI_SD0 BIT(7)
|
||||
|
||||
#define MAX77620_REG_IRQ_LVL2_L0_7 0x08 // LDO number that irq occured.
|
||||
#define MAX77620_REG_IRQ_MSK_L0_7 0x10
|
||||
#define MAX77620_REG_IRQ_LVL2_L8 0x09 // LDO number that irq occured. Only bit0: LDO8 is valid.
|
||||
#define MAX77620_REG_IRQ_MSK_L8 0x11
|
||||
#define MAX77620_REG_IRQ_LVL2_GPIO 0x0A // Edge detection interrupt.
|
||||
|
||||
#define MAX77620_REG_ONOFFIRQ 0x0B
|
||||
#define MAX77620_REG_ONOFFIRQM 0x12
|
||||
#define MAX77620_ONOFFIRQ_MRWRN BIT(0)
|
||||
#define MAX77620_ONOFFIRQ_EN0_1SEC BIT(1)
|
||||
#define MAX77620_ONOFFIRQ_EN0_F BIT(2)
|
||||
#define MAX77620_ONOFFIRQ_EN0_R BIT(3)
|
||||
#define MAX77620_ONOFFIRQ_LID_F BIT(4)
|
||||
#define MAX77620_ONOFFIRQ_LID_R BIT(5)
|
||||
#define MAX77620_ONOFFIRQ_ACOK_F BIT(6)
|
||||
#define MAX77620_ONOFFIRQ_ACOK_R BIT(7)
|
||||
|
||||
#define MAX77620_REG_NVERC 0x0C // Shutdown reason (non-volatile).
|
||||
#define MAX77620_NVERC_SHDN BIT(0)
|
||||
#define MAX77620_NVERC_WTCHDG BIT(1)
|
||||
#define MAX77620_NVERC_HDRST BIT(2)
|
||||
#define MAX77620_NVERC_TOVLD BIT(3)
|
||||
#define MAX77620_NVERC_MBLSD BIT(4)
|
||||
#define MAX77620_NVERC_MBO BIT(5)
|
||||
#define MAX77620_NVERC_MBU BIT(6)
|
||||
#define MAX77620_NVERC_RSTIN BIT(7)
|
||||
|
||||
#define MAX77620_REG_STATLBT 0x13
|
||||
#define MAX77620_REG_STATSD 0x14
|
||||
|
||||
#define MAX77620_REG_ONOFFSTAT 0x15
|
||||
#define MAX77620_ONOFFSTAT_LID BIT(0)
|
||||
#define MAX77620_ONOFFSTAT_ACOK BIT(1)
|
||||
#define MAX77620_ONOFFSTAT_EN0 BIT(2)
|
||||
|
||||
/* SD and LDO Registers */
|
||||
#define MAX77620_REG_SD0 0x16
|
||||
|
|
@ -102,18 +136,42 @@
|
|||
#define MAX77620_REG_SD2 0x18
|
||||
#define MAX77620_REG_SD3 0x19
|
||||
#define MAX77620_REG_SD4 0x1A
|
||||
#define MAX77620_REG_DVSSD0 0x1B
|
||||
#define MAX77620_REG_DVSSD1 0x1C
|
||||
#define MAX77620_SDX_VOLT_MASK 0xFF
|
||||
#define MAX77620_SD0_VOLT_MASK 0x3F
|
||||
#define MAX77620_SD1_VOLT_MASK 0x7F
|
||||
#define MAX77620_LDO_VOLT_MASK 0x3F
|
||||
#define MAX77620_REG_DVSSD0 0x1B
|
||||
#define MAX77620_REG_DVSSD1 0x1C
|
||||
#define MAX77620_REG_SD0_CFG 0x1D // SD CNFG1.
|
||||
#define MAX77620_REG_SD1_CFG 0x1E // SD CNFG1.
|
||||
#define MAX77620_REG_SD2_CFG 0x1F // SD CNFG1.
|
||||
#define MAX77620_REG_SD3_CFG 0x20 // SD CNFG1.
|
||||
#define MAX77620_REG_SD4_CFG 0x21 // SD CNFG1.
|
||||
|
||||
#define MAX77620_REG_SD0_CFG 0x1D
|
||||
#define MAX77620_REG_SD1_CFG 0x1E
|
||||
#define MAX77620_REG_SD2_CFG 0x1F
|
||||
#define MAX77620_REG_SD3_CFG 0x20
|
||||
#define MAX77620_REG_SD4_CFG 0x21
|
||||
#define MAX77620_SD_SR_MASK 0xC0
|
||||
#define MAX77620_SD_SR_SHIFT 6
|
||||
#define MAX77620_SD_POWER_MODE_MASK 0x30
|
||||
#define MAX77620_SD_POWER_MODE_SHIFT 4
|
||||
#define MAX77620_SD_CFG1_ADE_MASK BIT(3)
|
||||
#define MAX77620_SD_CFG1_ADE_DISABLE 0
|
||||
#define MAX77620_SD_CFG1_ADE_ENABLE BIT(3)
|
||||
#define MAX77620_SD_FPWM_MASK 0x04
|
||||
#define MAX77620_SD_FPWM_SHIFT 2
|
||||
#define MAX77620_SD_FSRADE_MASK 0x01
|
||||
#define MAX77620_SD_FSRADE_SHIFT 0
|
||||
#define MAX77620_SD_CFG1_FPWM_SD_MASK BIT(2)
|
||||
#define MAX77620_SD_CFG1_FPWM_SD_SKIP 0
|
||||
#define MAX77620_SD_CFG1_FPWM_SD_FPWM BIT(2)
|
||||
#define MAX77620_SD_CFG1_MPOK_MASK BIT(1)
|
||||
#define MAX77620_SD_CFG1_FSRADE_SD_MASK BIT(0)
|
||||
#define MAX77620_SD_CFG1_FSRADE_SD_DISABLE 0
|
||||
#define MAX77620_SD_CFG1_FSRADE_SD_ENABLE BIT(0)
|
||||
|
||||
#define MAX77620_REG_SD_CFG2 0x22
|
||||
#define MAX77620_SD_CNF2_RSVD BIT(0)
|
||||
#define MAX77620_SD_CNF2_ROVS_EN_SD1 BIT(1)
|
||||
#define MAX77620_SD_CNF2_ROVS_EN_SD0 BIT(2)
|
||||
|
||||
#define MAX77620_REG_LDO0_CFG 0x23
|
||||
#define MAX77620_REG_LDO0_CFG2 0x24
|
||||
#define MAX77620_REG_LDO1_CFG 0x25
|
||||
|
|
@ -132,26 +190,36 @@
|
|||
#define MAX77620_REG_LDO7_CFG2 0x32
|
||||
#define MAX77620_REG_LDO8_CFG 0x33
|
||||
#define MAX77620_REG_LDO8_CFG2 0x34
|
||||
#define MAX77620_LDO_CFG2_SS_MASK (1 << 0)
|
||||
#define MAX77620_LDO_CFG2_SS_FAST (1 << 0)
|
||||
#define MAX77620_LDO_CFG2_SS_SLOW 0
|
||||
#define MAX77620_LDO_CFG2_ADE_MASK (1 << 1)
|
||||
#define MAX77620_LDO_CFG2_ADE_DISABLE (0 << 1)
|
||||
#define MAX77620_LDO_CFG2_ADE_ENABLE (1 << 1)
|
||||
#define MAX20024_LDO_CFG2_MPOK_MASK BIT(2)
|
||||
#define MAX77620_LDO_POWER_MODE_MASK 0xC0
|
||||
/*! LDO CFG */
|
||||
#define MAX77620_LDO_POWER_MODE_SHIFT 6
|
||||
#define MAX77620_LDO_POWER_MODE_MASK (3 << MAX77620_LDO_POWER_MODE_SHIFT)
|
||||
#define MAX77620_POWER_MODE_NORMAL 3
|
||||
#define MAX77620_POWER_MODE_LPM 2
|
||||
#define MAX77620_POWER_MODE_GLPM 1
|
||||
#define MAX77620_POWER_MODE_DISABLE 0
|
||||
/*! LDO CFG2 */
|
||||
#define MAX77620_LDO_CFG2_SS_MASK (1 << 0)
|
||||
#define MAX77620_LDO_CFG2_SS_FAST (0 << 0)
|
||||
#define MAX77620_LDO_CFG2_SS_SLOW (1 << 0)
|
||||
#define MAX77620_LDO_CFG2_ADE_MASK (1 << 1)
|
||||
#define MAX77620_LDO_CFG2_ADE_DISABLE (0 << 1)
|
||||
#define MAX77620_LDO_CFG2_ADE_ENABLE (1 << 1)
|
||||
#define MAX77620_LDO_CFG2_MPOK_MASK BIT(2)
|
||||
#define MAX77620_LDO_CFG2_POK_MASK BIT(3)
|
||||
#define MAX77620_LDO_CFG2_COMP_SHIFT 4
|
||||
#define MAX77620_LDO_CFG2_COMP_MASK (3 << MAX77620_LDO_COMP_SHIFT)
|
||||
#define MAX77620_LDO_CFG2_COMP_SLOW 3
|
||||
#define MAX77620_LDO_CFG2_COMP_MID_SLOW 2
|
||||
#define MAX77620_LDO_CFG2_COMP_MID_FAST 1
|
||||
#define MAX77620_LDO_CFG2_COMP_FAST 0
|
||||
#define MAX77620_LDO_CFG2_ALPM_EN_MASK BIT(6)
|
||||
#define MAX77620_LDO_CFG2_OVCLMP_MASK BIT(7)
|
||||
|
||||
#define MAX77620_REG_LDO_CFG3 0x35
|
||||
#define MAX77620_LDO_BIAS_EN BIT(0)
|
||||
#define MAX77620_TRACK4_SHIFT 5
|
||||
#define MAX77620_TRACK4_MASK (1 << MAX77620_TRACK4_SHIFT)
|
||||
|
||||
#define MAX77620_LDO_SLEW_RATE_MASK 0x1
|
||||
|
||||
#define MAX77620_REG_GPIO0 0x36
|
||||
#define MAX77620_REG_GPIO1 0x37
|
||||
#define MAX77620_REG_GPIO2 0x38
|
||||
|
|
@ -160,9 +228,6 @@
|
|||
#define MAX77620_REG_GPIO5 0x3B
|
||||
#define MAX77620_REG_GPIO6 0x3C
|
||||
#define MAX77620_REG_GPIO7 0x3D
|
||||
#define MAX77620_REG_PUE_GPIO 0x3E
|
||||
#define MAX77620_REG_PDE_GPIO 0x3F
|
||||
#define MAX77620_REG_AME_GPIO 0x40
|
||||
#define MAX77620_CNFG_GPIO_DRV_MASK (1 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DRV_PUSHPULL (1 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN (0 << 0)
|
||||
|
|
@ -181,6 +246,13 @@
|
|||
#define MAX77620_CNFG_GPIO_DBNC_8ms (0x1 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_16ms (0x2 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_32ms (0x3 << 6)
|
||||
#define MAX77620_GPIO_OUTPUT_DISABLE 0
|
||||
#define MAX77620_GPIO_OUTPUT_ENABLE 1
|
||||
|
||||
#define MAX77620_REG_PUE_GPIO 0x3E // Gpio Pullup resistor enable.
|
||||
#define MAX77620_REG_PDE_GPIO 0x3F // Gpio Pulldown resistor enable.
|
||||
|
||||
#define MAX77620_REG_AME_GPIO 0x40 // Gpio pinmuxing. Clear bits are Standard GPIO.
|
||||
|
||||
#define MAX77620_REG_ONOFFCNFG1 0x41
|
||||
#define MAX20024_ONOFFCNFG1_CLRSE 0x18
|
||||
|
|
@ -188,19 +260,30 @@
|
|||
#define MAX77620_ONOFFCNFG1_SLPEN BIT(2)
|
||||
#define MAX77620_ONOFFCNFG1_MRT_SHIFT 0x3
|
||||
#define MAX77620_ONOFFCNFG1_MRT_MASK 0x38
|
||||
#define MAX77620_ONOFFCNFG1_RSVD BIT(6)
|
||||
#define MAX77620_ONOFFCNFG1_SFT_RST BIT(7)
|
||||
|
||||
#define MAX77620_REG_ONOFFCNFG2 0x42
|
||||
#define MAX77620_ONOFFCNFG2_WK_EN0 BIT(0)
|
||||
#define MAX77620_ONOFFCNFG2_WK_ALARM2 BIT(1)
|
||||
#define MAX77620_ONOFFCNFG2_WK_ALARM1 BIT(2)
|
||||
#define MAX77620_ONOFFCNFG2_WK_MBATT BIT(3) // MBATT event generates a wakeup signal. use it in android/l4t?
|
||||
#define MAX77620_ONOFFCNFG2_WK_ACOK BIT(4)
|
||||
#define MAX77620_ONOFFCNFG2_SLP_LPM_MSK BIT(5)
|
||||
#define MAX77620_ONOFFCNFG2_WD_RST_WK BIT(6)
|
||||
#define MAX77620_ONOFFCNFG2_SFT_RST_WK BIT(7)
|
||||
|
||||
/* FPS Registers */
|
||||
#define MAX77620_REG_FPS_CFG0 0x43
|
||||
#define MAX77620_REG_FPS_CFG1 0x44
|
||||
#define MAX77620_REG_FPS_CFG2 0x45
|
||||
#define MAX77620_REG_FPS_CFG0 0x43 // FPS0.
|
||||
#define MAX77620_REG_FPS_CFG1 0x44 // FPS1.
|
||||
#define MAX77620_REG_FPS_CFG2 0x45 // FPS2.
|
||||
#define MAX77620_FPS_ENFPS_SW_MASK 0x01
|
||||
#define MAX77620_FPS_ENFPS_SW 0x01
|
||||
#define MAX77620_FPS_EN_SRC_SHIFT 1
|
||||
#define MAX77620_FPS_EN_SRC_MASK 0x06
|
||||
#define MAX77620_FPS_TIME_PERIOD_SHIFT 3
|
||||
#define MAX77620_FPS_TIME_PERIOD_MASK 0x38
|
||||
|
||||
#define MAX77620_REG_FPS_LDO0 0x46
|
||||
#define MAX77620_REG_FPS_LDO1 0x47
|
||||
#define MAX77620_REG_FPS_LDO2 0x48
|
||||
|
|
@ -215,77 +298,39 @@
|
|||
#define MAX77620_REG_FPS_SD2 0x51
|
||||
#define MAX77620_REG_FPS_SD3 0x52
|
||||
#define MAX77620_REG_FPS_SD4 0x53
|
||||
#define MAX77620_REG_FPS_NONE 0
|
||||
#define MAX77620_FPS_SRC_MASK 0xC0
|
||||
#define MAX77620_FPS_SRC_SHIFT 6
|
||||
#define MAX77620_FPS_PU_PERIOD_MASK 0x38
|
||||
#define MAX77620_FPS_PU_PERIOD_SHIFT 3
|
||||
#define MAX77620_FPS_PD_PERIOD_MASK 0x07
|
||||
#define MAX77620_FPS_PD_PERIOD_SHIFT 0
|
||||
|
||||
/* Minimum and maximum FPS period time (in microseconds) are
|
||||
* different for MAX77620 and Max20024.
|
||||
*/
|
||||
#define MAX77620_FPS_COUNT 3
|
||||
|
||||
#define MAX77620_FPS_PERIOD_MIN_US 40
|
||||
#define MAX20024_FPS_PERIOD_MIN_US 20
|
||||
|
||||
#define MAX77620_FPS_PERIOD_MAX_US 2560
|
||||
#define MAX20024_FPS_PERIOD_MAX_US 5120
|
||||
|
||||
#define MAX77620_REG_FPS_GPIO1 0x54
|
||||
#define MAX77620_REG_FPS_GPIO2 0x55
|
||||
#define MAX77620_REG_FPS_GPIO3 0x56
|
||||
#define MAX77620_FPS_TIME_PERIOD_MASK 0x38
|
||||
#define MAX77620_FPS_TIME_PERIOD_SHIFT 3
|
||||
#define MAX77620_FPS_EN_SRC_MASK 0x06
|
||||
#define MAX77620_FPS_EN_SRC_SHIFT 1
|
||||
#define MAX77620_FPS_ENFPS_SW_MASK 0x01
|
||||
#define MAX77620_FPS_ENFPS_SW 0x01
|
||||
|
||||
#define MAX77620_REG_FPS_RSO 0x57
|
||||
#define MAX77620_FPS_PD_PERIOD_SHIFT 0
|
||||
#define MAX77620_FPS_PD_PERIOD_MASK 0x07
|
||||
#define MAX77620_FPS_PU_PERIOD_SHIFT 3
|
||||
#define MAX77620_FPS_PU_PERIOD_MASK 0x38
|
||||
#define MAX77620_FPS_SRC_SHIFT 6
|
||||
#define MAX77620_FPS_SRC_MASK 0xC0
|
||||
|
||||
#define MAX77620_FPS_COUNT 3
|
||||
#define MAX77620_FPS_PERIOD_MIN_US 40
|
||||
#define MAX77620_FPS_PERIOD_MAX_US 2560
|
||||
|
||||
#define MAX77620_REG_CID0 0x58
|
||||
#define MAX77620_REG_CID1 0x59
|
||||
#define MAX77620_REG_CID2 0x5A
|
||||
#define MAX77620_REG_CID3 0x5B
|
||||
#define MAX77620_REG_CID4 0x5C
|
||||
#define MAX77620_REG_CID4 0x5C // OTP version.
|
||||
#define MAX77620_REG_CID5 0x5D
|
||||
|
||||
#define MAX77620_REG_DVSSD4 0x5E
|
||||
#define MAX20024_REG_MAX_ADD 0x70
|
||||
|
||||
#define MAX77620_CID_DIDM_MASK 0xF0
|
||||
#define MAX77620_CID_DIDM_SHIFT 4
|
||||
|
||||
/* CNCG2SD */
|
||||
#define MAX77620_SD_CNF2_ROVS_EN_SD1 BIT(1)
|
||||
#define MAX77620_SD_CNF2_ROVS_EN_SD0 BIT(2)
|
||||
#define MAX77620_CID_DIDO_MASK 0xF
|
||||
#define MAX77620_CID_DIDO_SHIFT 0
|
||||
#define MAX77620_CID_DIDM_MASK 0xF0
|
||||
#define MAX77620_CID_DIDM_SHIFT 4
|
||||
|
||||
/* Device Identification Metal */
|
||||
#define MAX77620_CID5_DIDM(n) (((n) >> 4) & 0xF)
|
||||
/* Device Indentification OTP */
|
||||
#define MAX77620_CID5_DIDO(n) ((n) & 0xF)
|
||||
|
||||
/* SD CNFG1 */
|
||||
#define MAX77620_SD_SR_MASK 0xC0
|
||||
#define MAX77620_SD_SR_SHIFT 6
|
||||
#define MAX77620_SD_POWER_MODE_MASK 0x30
|
||||
#define MAX77620_SD_POWER_MODE_SHIFT 4
|
||||
#define MAX77620_SD_CFG1_ADE_MASK BIT(3)
|
||||
#define MAX77620_SD_CFG1_ADE_DISABLE 0
|
||||
#define MAX77620_SD_CFG1_ADE_ENABLE BIT(3)
|
||||
#define MAX77620_SD_FPWM_MASK 0x04
|
||||
#define MAX77620_SD_FPWM_SHIFT 2
|
||||
#define MAX77620_SD_FSRADE_MASK 0x01
|
||||
#define MAX77620_SD_FSRADE_SHIFT 0
|
||||
#define MAX77620_SD_CFG1_FPWM_SD_MASK BIT(2)
|
||||
#define MAX77620_SD_CFG1_FPWM_SD_SKIP 0
|
||||
#define MAX77620_SD_CFG1_FPWM_SD_FPWM BIT(2)
|
||||
#define MAX20024_SD_CFG1_MPOK_MASK BIT(1)
|
||||
#define MAX77620_SD_CFG1_FSRADE_SD_MASK BIT(0)
|
||||
#define MAX77620_SD_CFG1_FSRADE_SD_DISABLE 0
|
||||
#define MAX77620_SD_CFG1_FSRADE_SD_ENABLE BIT(0)
|
||||
#define MAX77620_REG_DVSSD4 0x5E
|
||||
#define MAX20024_REG_MAX_ADD 0x70
|
||||
|
||||
#define MAX77620_IRQ_LVL2_GPIO_EDGE0 BIT(0)
|
||||
#define MAX77620_IRQ_LVL2_GPIO_EDGE1 BIT(1)
|
||||
|
|
@ -332,9 +377,4 @@ enum max77620_fps_src {
|
|||
MAX77620_FPS_SRC_DEF,
|
||||
};
|
||||
|
||||
enum max77620_chip_id {
|
||||
MAX77620,
|
||||
MAX20024,
|
||||
};
|
||||
|
||||
#endif /* _MFD_MAX77620_H_ */
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/*
|
||||
* Copyright (c) 2018 naehrwert
|
||||
* Copyright (c) 2019 CTCaer
|
||||
* Copyright (c) 2019-2020 CTCaer
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
|
|
@ -17,163 +17,323 @@
|
|||
|
||||
#include <power/max7762x.h>
|
||||
#include <power/max77620.h>
|
||||
#include <power/max77812.h>
|
||||
#include <soc/fuse.h>
|
||||
#include <soc/i2c.h>
|
||||
#include <soc/t210.h>
|
||||
#include <utils/util.h>
|
||||
|
||||
#define REGULATOR_SD 0
|
||||
#define REGULATOR_SD 0
|
||||
#define REGULATOR_LDO 1
|
||||
#define REGULATOR_BC0 2
|
||||
#define REGULATOR_BC1 3
|
||||
|
||||
typedef struct _max77620_regulator_t
|
||||
typedef struct _max77620_fps_t
|
||||
{
|
||||
u8 type;
|
||||
const char *name;
|
||||
u8 reg_sd;
|
||||
|
||||
u32 mv_step;
|
||||
u32 mv_min;
|
||||
u32 mv_default;
|
||||
u32 mv_max;
|
||||
|
||||
u8 volt_addr;
|
||||
u8 cfg_addr;
|
||||
|
||||
u8 volt_mask;
|
||||
u8 enable_mask;
|
||||
u8 enable_shift;
|
||||
u8 status_mask;
|
||||
|
||||
u8 fps_addr;
|
||||
u8 fps_src;
|
||||
u8 pd_period;
|
||||
u8 pu_period;
|
||||
} max77620_fps_t;
|
||||
|
||||
typedef struct _max77621_ctrl_t
|
||||
{
|
||||
u8 ctrl1_por;
|
||||
u8 ctrl1_hos;
|
||||
u8 ctrl2_por;
|
||||
u8 ctrl2_hos;
|
||||
} max77621_ctrl_t;
|
||||
|
||||
typedef struct _max77812_ctrl_t
|
||||
{
|
||||
u8 mask;
|
||||
u8 shift;
|
||||
u8 rsvd0;
|
||||
u8 rsvd1;
|
||||
} max77812_en_t;
|
||||
|
||||
typedef struct _max77620_regulator_t
|
||||
{
|
||||
const char *name;
|
||||
|
||||
u32 uv_step;
|
||||
u32 uv_min;
|
||||
u32 uv_default;
|
||||
u32 uv_max;
|
||||
|
||||
u8 type;
|
||||
u8 volt_addr;
|
||||
u8 cfg_addr;
|
||||
u8 volt_mask;
|
||||
|
||||
union {
|
||||
max77620_fps_t fps;
|
||||
max77621_ctrl_t ctrl;
|
||||
max77812_en_t enable;
|
||||
};
|
||||
} max77620_regulator_t;
|
||||
|
||||
static const max77620_regulator_t _pmic_regulators[] = {
|
||||
{ REGULATOR_SD, "sd0", 0x16, 12500, 600000, 625000, 1400000, MAX77620_REG_SD0, MAX77620_REG_SD0_CFG, MAX77620_SD0_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK, MAX77620_SD_POWER_MODE_SHIFT, 0x80, MAX77620_REG_FPS_SD0, 1, 7, 1 },
|
||||
{ REGULATOR_SD, "sd1", 0x17, 12500, 600000, 1125000, 1125000, MAX77620_REG_SD1, MAX77620_REG_SD1_CFG, MAX77620_SD1_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK, MAX77620_SD_POWER_MODE_SHIFT, 0x40, MAX77620_REG_FPS_SD1, 0, 1, 5 },
|
||||
{ REGULATOR_SD, "sd2", 0x18, 12500, 600000, 1325000, 1350000, MAX77620_REG_SD2, MAX77620_REG_SD2_CFG, MAX77620_SDX_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK, MAX77620_SD_POWER_MODE_SHIFT, 0x20, MAX77620_REG_FPS_SD2, 1, 5, 2 },
|
||||
{ REGULATOR_SD, "sd3", 0x19, 12500, 600000, 1800000, 1800000, MAX77620_REG_SD3, MAX77620_REG_SD3_CFG, MAX77620_SDX_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK, MAX77620_SD_POWER_MODE_SHIFT, 0x10, MAX77620_REG_FPS_SD3, 0, 3, 3 },
|
||||
{ REGULATOR_LDO, "ldo0", 0x00, 25000, 800000, 1200000, 1200000, MAX77620_REG_LDO0_CFG, MAX77620_REG_LDO0_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00, MAX77620_REG_FPS_LDO0, 3, 7, 0 },
|
||||
{ REGULATOR_LDO, "ldo1", 0x00, 25000, 800000, 1050000, 1050000, MAX77620_REG_LDO1_CFG, MAX77620_REG_LDO1_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00, MAX77620_REG_FPS_LDO1, 3, 7, 0 },
|
||||
{ REGULATOR_LDO, "ldo2", 0x00, 50000, 800000, 1800000, 3300000, MAX77620_REG_LDO2_CFG, MAX77620_REG_LDO2_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00, MAX77620_REG_FPS_LDO2, 3, 7, 0 },
|
||||
{ REGULATOR_LDO, "ldo3", 0x00, 50000, 800000, 3100000, 3100000, MAX77620_REG_LDO3_CFG, MAX77620_REG_LDO3_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00, MAX77620_REG_FPS_LDO3, 3, 7, 0 },
|
||||
{ REGULATOR_LDO, "ldo4", 0x00, 12500, 800000, 850000, 850000, MAX77620_REG_LDO4_CFG, MAX77620_REG_LDO4_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00, MAX77620_REG_FPS_LDO4, 0, 7, 1 },
|
||||
{ REGULATOR_LDO, "ldo5", 0x00, 50000, 800000, 1800000, 1800000, MAX77620_REG_LDO5_CFG, MAX77620_REG_LDO5_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00, MAX77620_REG_FPS_LDO5, 3, 7, 0 },
|
||||
{ REGULATOR_LDO, "ldo6", 0x00, 50000, 800000, 2900000, 2900000, MAX77620_REG_LDO6_CFG, MAX77620_REG_LDO6_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00, MAX77620_REG_FPS_LDO6, 3, 7, 0 },
|
||||
{ REGULATOR_LDO, "ldo7", 0x00, 50000, 800000, 1050000, 1050000, MAX77620_REG_LDO7_CFG, MAX77620_REG_LDO7_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00, MAX77620_REG_FPS_LDO7, 1, 4, 3 },
|
||||
{ REGULATOR_LDO, "ldo8", 0x00, 50000, 800000, 1050000, 2800000, MAX77620_REG_LDO8_CFG, MAX77620_REG_LDO8_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00, MAX77620_REG_FPS_LDO8, 3, 7, 0 }
|
||||
{ "sd0", 12500, 600000, 625000, 1400000, REGULATOR_SD, MAX77620_REG_SD0, MAX77620_REG_SD0_CFG, MAX77620_SD0_VOLT_MASK, {{ MAX77620_REG_FPS_SD0, 1, 7, 1 }} },
|
||||
{ "sd1", 12500, 600000, 1125000, 1250000, REGULATOR_SD, MAX77620_REG_SD1, MAX77620_REG_SD1_CFG, MAX77620_SD1_VOLT_MASK, {{ MAX77620_REG_FPS_SD1, 0, 1, 5 }} },
|
||||
{ "sd2", 12500, 600000, 1325000, 1350000, REGULATOR_SD, MAX77620_REG_SD2, MAX77620_REG_SD2_CFG, MAX77620_SDX_VOLT_MASK, {{ MAX77620_REG_FPS_SD2, 1, 5, 2 }} },
|
||||
{ "sd3", 12500, 600000, 1800000, 1800000, REGULATOR_SD, MAX77620_REG_SD3, MAX77620_REG_SD3_CFG, MAX77620_SDX_VOLT_MASK, {{ MAX77620_REG_FPS_SD3, 0, 3, 3 }} },
|
||||
{ "ldo0", 25000, 800000, 1200000, 1200000, REGULATOR_LDO, MAX77620_REG_LDO0_CFG, MAX77620_REG_LDO0_CFG2, MAX77620_LDO_VOLT_MASK, {{ MAX77620_REG_FPS_LDO0, 3, 7, 0 }} },
|
||||
{ "ldo1", 25000, 800000, 1050000, 1050000, REGULATOR_LDO, MAX77620_REG_LDO1_CFG, MAX77620_REG_LDO1_CFG2, MAX77620_LDO_VOLT_MASK, {{ MAX77620_REG_FPS_LDO1, 3, 7, 0 }} },
|
||||
{ "ldo2", 50000, 800000, 1800000, 3300000, REGULATOR_LDO, MAX77620_REG_LDO2_CFG, MAX77620_REG_LDO2_CFG2, MAX77620_LDO_VOLT_MASK, {{ MAX77620_REG_FPS_LDO2, 3, 7, 0 }} },
|
||||
{ "ldo3", 50000, 800000, 3100000, 3100000, REGULATOR_LDO, MAX77620_REG_LDO3_CFG, MAX77620_REG_LDO3_CFG2, MAX77620_LDO_VOLT_MASK, {{ MAX77620_REG_FPS_LDO3, 3, 7, 0 }} },
|
||||
{ "ldo4", 12500, 800000, 850000, 1000000, REGULATOR_LDO, MAX77620_REG_LDO4_CFG, MAX77620_REG_LDO4_CFG2, MAX77620_LDO_VOLT_MASK, {{ MAX77620_REG_FPS_LDO4, 0, 7, 1 }} },
|
||||
{ "ldo5", 50000, 800000, 1800000, 1800000, REGULATOR_LDO, MAX77620_REG_LDO5_CFG, MAX77620_REG_LDO5_CFG2, MAX77620_LDO_VOLT_MASK, {{ MAX77620_REG_FPS_LDO5, 3, 7, 0 }} },
|
||||
{ "ldo6", 50000, 800000, 2900000, 2900000, REGULATOR_LDO, MAX77620_REG_LDO6_CFG, MAX77620_REG_LDO6_CFG2, MAX77620_LDO_VOLT_MASK, {{ MAX77620_REG_FPS_LDO6, 3, 7, 0 }} },
|
||||
{ "ldo7", 50000, 800000, 1050000, 1050000, REGULATOR_LDO, MAX77620_REG_LDO7_CFG, MAX77620_REG_LDO7_CFG2, MAX77620_LDO_VOLT_MASK, {{ MAX77620_REG_FPS_LDO7, 1, 4, 3 }} },
|
||||
{ "ldo8", 50000, 800000, 1050000, 2800000, REGULATOR_LDO, MAX77620_REG_LDO8_CFG, MAX77620_REG_LDO8_CFG2, MAX77620_LDO_VOLT_MASK, {{ MAX77620_REG_FPS_LDO8, 3, 7, 0 }} },
|
||||
|
||||
{ "max77621_CPU", 6250, 606250, 1000000, 1400000, REGULATOR_BC0, MAX77621_VOUT_REG, MAX77621_VOUT_DVS_REG, MAX77621_DVC_DVS_VOLT_MASK, {{ MAX77621_CPU_CTRL1_POR_DEFAULT, MAX77621_CPU_CTRL1_HOS_DEFAULT, MAX77621_CPU_CTRL2_POR_DEFAULT, MAX77621_CPU_CTRL2_HOS_DEFAULT }} },
|
||||
{ "max77621_GPU", 6250, 606250, 1200000, 1400000, REGULATOR_BC0, MAX77621_VOUT_REG, MAX77621_VOUT_DVS_REG, MAX77621_DVC_DVS_VOLT_MASK, {{ MAX77621_CPU_CTRL1_POR_DEFAULT, MAX77621_CPU_CTRL1_HOS_DEFAULT, MAX77621_CPU_CTRL2_POR_DEFAULT, MAX77621_CPU_CTRL2_HOS_DEFAULT }} },
|
||||
{ "max77812_CPU", 5000, 250000, 600000, 1525000, REGULATOR_BC1, MAX77812_REG_M4_VOUT, MAX77812_REG_EN_CTRL, MAX77812_BUCK_VOLT_MASK, {{ MAX77812_EN_CTRL_EN_M4_MASK, MAX77812_EN_CTRL_EN_M4_SHIFT, 0, 0 }} },
|
||||
//{ "max77812_GPU", 5000, 250000, 600000, 1525000, REGULATOR_BC1, MAX77812_REG_M1_VOUT, MAX77812_REG_EN_CTRL, MAX77812_BUCK_VOLT_MASK, {{ MAX77812_EN_CTRL_EN_M1_MASK, MAX77812_EN_CTRL_EN_M1_SHIFT, 0, 0 }} },
|
||||
//{ "max77812_RAM", 5000, 250000, 600000, 1525000, REGULATOR_BC1, MAX77812_REG_M3_VOUT, MAX77812_REG_EN_CTRL, MAX77812_BUCK_VOLT_MASK, {{ MAX77812_EN_CTRL_EN_M3_MASK, MAX77812_EN_CTRL_EN_M3_SHIFT, 0, 0 }} } // Only on PHASE211 configuration.
|
||||
};
|
||||
|
||||
static void _max77620_set_reg(u8 reg, u8 val)
|
||||
static u8 _max77812_get_address()
|
||||
{
|
||||
static u8 max77812_i2c_addr = 0;
|
||||
|
||||
if (max77812_i2c_addr)
|
||||
return max77812_i2c_addr;
|
||||
|
||||
max77812_i2c_addr =
|
||||
!(FUSE(FUSE_RESERVED_ODM28_T210B01) & 1) ? MAX77812_PHASE31_CPU_I2C_ADDR : MAX77812_PHASE211_CPU_I2C_ADDR;
|
||||
|
||||
return max77812_i2c_addr;
|
||||
}
|
||||
|
||||
static u8 _max7762x_get_i2c_address(u32 id)
|
||||
{
|
||||
const max77620_regulator_t *reg = &_pmic_regulators[id];
|
||||
|
||||
// Choose the correct i2c address.
|
||||
switch (reg->type)
|
||||
{
|
||||
case REGULATOR_SD:
|
||||
case REGULATOR_LDO:
|
||||
return MAX77620_I2C_ADDR;
|
||||
case REGULATOR_BC0:
|
||||
return (id == REGULATOR_CPU0 ? MAX77621_CPU_I2C_ADDR : MAX77621_GPU_I2C_ADDR);
|
||||
case REGULATOR_BC1:
|
||||
return _max77812_get_address();
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
static void _max7762x_set_reg(u8 addr, u8 reg, u8 val)
|
||||
{
|
||||
u32 retries = 100;
|
||||
while (retries)
|
||||
{
|
||||
if (i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, reg, val))
|
||||
if (i2c_send_byte(I2C_5, addr, reg, val))
|
||||
break;
|
||||
usleep(100);
|
||||
|
||||
usleep(50);
|
||||
retries--;
|
||||
}
|
||||
}
|
||||
|
||||
int max77620_regulator_get_status(u32 id)
|
||||
{
|
||||
if (id > REGULATOR_MAX)
|
||||
if (id > REGULATOR_LDO8)
|
||||
return 0;
|
||||
|
||||
const max77620_regulator_t *reg = &_pmic_regulators[id];
|
||||
|
||||
// SD power OK status.
|
||||
if (reg->type == REGULATOR_SD)
|
||||
return (i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_STATSD) & reg->status_mask) ? 0 : 1;
|
||||
return (i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, reg->cfg_addr) & 8) ? 1 : 0;
|
||||
{
|
||||
u8 mask = 1u << (7 - id);
|
||||
return (i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_STATSD) & mask) ? 0 : 1;
|
||||
}
|
||||
|
||||
// LDO power OK status.
|
||||
return (i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, reg->cfg_addr) & MAX77620_LDO_CFG2_POK_MASK) ? 1 : 0;
|
||||
}
|
||||
|
||||
int max77620_regulator_config_fps(u32 id)
|
||||
{
|
||||
if (id > REGULATOR_MAX)
|
||||
if (id > REGULATOR_LDO8)
|
||||
return 0;
|
||||
|
||||
const max77620_regulator_t *reg = &_pmic_regulators[id];
|
||||
|
||||
_max77620_set_reg(reg->fps_addr,
|
||||
(reg->fps_src << MAX77620_FPS_SRC_SHIFT) | (reg->pu_period << MAX77620_FPS_PU_PERIOD_SHIFT) | (reg->pd_period));
|
||||
// Set FPS configuration.
|
||||
_max7762x_set_reg(MAX77620_I2C_ADDR,
|
||||
reg->fps.fps_addr,
|
||||
(reg->fps.fps_src << MAX77620_FPS_SRC_SHIFT) |
|
||||
(reg->fps.pu_period << MAX77620_FPS_PU_PERIOD_SHIFT) |
|
||||
(reg->fps.pd_period << MAX77620_FPS_PD_PERIOD_SHIFT));
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
int max77620_regulator_set_voltage(u32 id, u32 mv)
|
||||
int max7762x_regulator_set_voltage(u32 id, u32 mv)
|
||||
{
|
||||
if (id > REGULATOR_MAX)
|
||||
return 0;
|
||||
|
||||
const max77620_regulator_t *reg = &_pmic_regulators[id];
|
||||
|
||||
if (mv < reg->mv_min || mv > reg->mv_max)
|
||||
if (mv < reg->uv_min || mv > reg->uv_max)
|
||||
return 0;
|
||||
|
||||
u32 mult = (mv + reg->mv_step - 1 - reg->mv_min) / reg->mv_step;
|
||||
u8 val = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, reg->volt_addr);
|
||||
u8 addr = _max7762x_get_i2c_address(id);
|
||||
|
||||
// Calculate voltage multiplier.
|
||||
u32 mult = (mv + reg->uv_step - 1 - reg->uv_min) / reg->uv_step;
|
||||
u8 val = i2c_recv_byte(I2C_5, addr, reg->volt_addr);
|
||||
val = (val & ~reg->volt_mask) | (mult & reg->volt_mask);
|
||||
_max77620_set_reg(reg->volt_addr, val);
|
||||
|
||||
// Set voltage.
|
||||
_max7762x_set_reg(addr, reg->volt_addr, val);
|
||||
|
||||
// If max77621 set DVS voltage also.
|
||||
if (reg->type == REGULATOR_BC0)
|
||||
_max7762x_set_reg(addr, reg->cfg_addr, MAX77621_VOUT_ENABLE_MASK | val);
|
||||
|
||||
// Wait for ramp up/down delay.
|
||||
usleep(1000);
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
int max77620_regulator_enable(u32 id, int enable)
|
||||
int max7762x_regulator_enable(u32 id, bool enable)
|
||||
{
|
||||
u8 reg_addr;
|
||||
u8 enable_val;
|
||||
u8 enable_mask;
|
||||
u8 enable_shift;
|
||||
|
||||
if (id > REGULATOR_MAX)
|
||||
return 0;
|
||||
|
||||
const max77620_regulator_t *reg = &_pmic_regulators[id];
|
||||
|
||||
u32 addr = reg->type == REGULATOR_SD ? reg->cfg_addr : reg->volt_addr;
|
||||
u8 val = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, addr);
|
||||
// Choose the correct i2c and register addresses and mask/shift for each type.
|
||||
switch (reg->type)
|
||||
{
|
||||
case REGULATOR_SD:
|
||||
reg_addr = reg->cfg_addr;
|
||||
enable_val = MAX77620_POWER_MODE_NORMAL;
|
||||
enable_mask = MAX77620_SD_POWER_MODE_MASK;
|
||||
enable_shift = MAX77620_SD_POWER_MODE_SHIFT;
|
||||
break;
|
||||
case REGULATOR_LDO:
|
||||
reg_addr = reg->volt_addr;
|
||||
enable_val = MAX77620_POWER_MODE_NORMAL;
|
||||
enable_mask = MAX77620_LDO_POWER_MODE_MASK;
|
||||
enable_shift = MAX77620_LDO_POWER_MODE_SHIFT;
|
||||
break;
|
||||
case REGULATOR_BC0:
|
||||
reg_addr = reg->volt_addr;
|
||||
enable_val = MAX77621_VOUT_ENABLE;
|
||||
enable_mask = MAX77621_DVC_DVS_ENABLE_MASK;
|
||||
enable_shift = MAX77621_DVC_DVS_ENABLE_SHIFT;
|
||||
break;
|
||||
case REGULATOR_BC1:
|
||||
reg_addr = reg->cfg_addr;
|
||||
enable_val = MAX77812_EN_CTRL_ENABLE;
|
||||
enable_mask = reg->enable.mask;
|
||||
enable_shift = reg->enable.shift;
|
||||
break;
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
|
||||
u8 addr = _max7762x_get_i2c_address(id);
|
||||
|
||||
// Read and enable/disable.
|
||||
u8 val = i2c_recv_byte(I2C_5, addr, reg_addr);
|
||||
val &= ~enable_mask;
|
||||
|
||||
if (enable)
|
||||
val = (val & ~reg->enable_mask) | ((MAX77620_POWER_MODE_NORMAL << reg->enable_shift) & reg->enable_mask);
|
||||
else
|
||||
val &= ~reg->enable_mask;
|
||||
_max77620_set_reg(addr, val);
|
||||
val |= (enable_val << enable_shift);
|
||||
|
||||
// Set enable.
|
||||
_max7762x_set_reg(addr, reg_addr, val);
|
||||
|
||||
// Wait for enable/disable ramp delay.
|
||||
usleep(1000);
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
// LDO only.
|
||||
int max77620_regulator_set_volt_and_flags(u32 id, u32 mv, u8 flags)
|
||||
void max77620_config_gpio(u32 gpio_id, bool enable)
|
||||
{
|
||||
if (id > REGULATOR_MAX)
|
||||
return 0;
|
||||
if (gpio_id > 7)
|
||||
return;
|
||||
|
||||
// Configure as standard GPIO.
|
||||
u8 val = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO, val & ~BIT(gpio_id));
|
||||
|
||||
// Set GPIO configuration.
|
||||
if (enable)
|
||||
val = MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH | MAX77620_CNFG_GPIO_DIR_OUTPUT | MAX77620_CNFG_GPIO_DRV_PUSHPULL;
|
||||
else
|
||||
val = MAX77620_CNFG_GPIO_DIR_INPUT | MAX77620_CNFG_GPIO_DRV_OPENDRAIN;
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO0 + gpio_id, val);
|
||||
}
|
||||
|
||||
void max77621_config_default(u32 id, bool por)
|
||||
{
|
||||
const max77620_regulator_t *reg = &_pmic_regulators[id];
|
||||
|
||||
if (mv < reg->mv_min || mv > reg->mv_max)
|
||||
return 0;
|
||||
if (reg->type != REGULATOR_BC0)
|
||||
return;
|
||||
|
||||
u32 mult = (mv + reg->mv_step - 1 - reg->mv_min) / reg->mv_step;
|
||||
u8 val = ((flags << reg->enable_shift) & ~reg->volt_mask) | (mult & reg->volt_mask);
|
||||
_max77620_set_reg(reg->volt_addr, val);
|
||||
usleep(1000);
|
||||
u8 addr = _max7762x_get_i2c_address(id);
|
||||
|
||||
return 1;
|
||||
if (por)
|
||||
{
|
||||
// Set voltage and disable power before changing the inductor.
|
||||
max7762x_regulator_set_voltage(id, 1000000);
|
||||
max7762x_regulator_enable(id, false);
|
||||
|
||||
// Configure to default.
|
||||
i2c_send_byte(I2C_5, addr, MAX77621_CONTROL1_REG, reg->ctrl.ctrl1_por);
|
||||
i2c_send_byte(I2C_5, addr, MAX77621_CONTROL2_REG, reg->ctrl.ctrl2_por);
|
||||
}
|
||||
else
|
||||
{
|
||||
i2c_send_byte(I2C_5, addr, MAX77621_CONTROL1_REG, reg->ctrl.ctrl1_hos);
|
||||
i2c_send_byte(I2C_5, addr, MAX77621_CONTROL2_REG, reg->ctrl.ctrl2_hos);
|
||||
}
|
||||
}
|
||||
|
||||
void max77620_config_default()
|
||||
{
|
||||
for (u32 i = 1; i <= REGULATOR_MAX; i++)
|
||||
// Check if Erista OTP.
|
||||
if (i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CID4) != 0x35)
|
||||
return;
|
||||
|
||||
// Set default voltages and enable regulators.
|
||||
for (u32 i = 1; i <= REGULATOR_LDO8; i++)
|
||||
{
|
||||
i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CID4);
|
||||
max77620_regulator_config_fps(i);
|
||||
max77620_regulator_set_voltage(i, _pmic_regulators[i].mv_default);
|
||||
if (_pmic_regulators[i].fps_src != MAX77620_FPS_SRC_NONE)
|
||||
max77620_regulator_enable(i, 1);
|
||||
max7762x_regulator_set_voltage(i, _pmic_regulators[i].uv_default);
|
||||
if (_pmic_regulators[i].fps.fps_src != MAX77620_FPS_SRC_NONE)
|
||||
max7762x_regulator_enable(i, true);
|
||||
}
|
||||
_max77620_set_reg(MAX77620_REG_SD_CFG2, 4);
|
||||
|
||||
// Enable SD0 output voltage sense and disable for SD1. Additionally disable the reserved bit.
|
||||
_max7762x_set_reg(MAX77620_I2C_ADDR, MAX77620_REG_SD_CFG2, MAX77620_SD_CNF2_ROVS_EN_SD0);
|
||||
}
|
||||
|
||||
// Stock HOS: disabled.
|
||||
void max77620_low_battery_monitor_config(bool enable)
|
||||
{
|
||||
_max77620_set_reg(MAX77620_REG_CNFGGLBL1,
|
||||
MAX77620_CNFGGLBL1_LBDAC_EN | (enable ? MAX77620_CNFGGLBL1_MPPLD : 0) |
|
||||
MAX77620_CNFGGLBL1_LBHYST_200 | MAX77620_CNFGGLBL1_LBDAC_2800);
|
||||
_max7762x_set_reg(MAX77620_I2C_ADDR, MAX77620_REG_CNFGGLBL1,
|
||||
MAX77620_CNFGGLBL1_LBDAC_EN |
|
||||
(enable ? MAX77620_CNFGGLBL1_MPPLD : 0) |
|
||||
MAX77620_CNFGGLBL1_LBHYST_200 |
|
||||
MAX77620_CNFGGLBL1_LBDAC_2800);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/*
|
||||
* Copyright (c) 2018 naehrwert
|
||||
* Copyright (c) 2019 CTCaer
|
||||
* Copyright (c) 2019-2020 CTCaer
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
|
|
@ -32,11 +32,11 @@
|
|||
* ldo1 | XUSB, PCIE | 25000 | 800000 | 1050000 | 1050000 | 1.05V (pcv)
|
||||
* ldo2 | SDMMC1 | 50000 | 800000 | 1800000 | 3300000 |
|
||||
* ldo3 | GC ASIC | 50000 | 800000 | 3100000 | 3100000 | 3.1V (pcv)
|
||||
* ldo4 | RTC | 12500 | 800000 | 850000 | 850000 |
|
||||
* ldo4 | RTC | 12500 | 800000 | 850000 | 850000 | 0.85V (AO, pcv)
|
||||
* ldo5 | GC Card | 50000 | 800000 | 1800000 | 1800000 | 1.8V (pcv)
|
||||
* ldo6 | Touch, ALS | 50000 | 800000 | 2900000 | 2900000 | 2.9V
|
||||
* ldo7 | XUSB | 50000 | 800000 | 1050000 | 1050000 |
|
||||
* ldo8 | XUSB, DC | 50000 | 800000 | 1050000 | 1050000 |
|
||||
* ldo6 | Touch, ALS | 50000 | 800000 | 2900000 | 2900000 | 2.9V (pcv)
|
||||
* ldo7 | XUSB | 50000 | 800000 | 1050000 | 1050000 | 1.05V (pcv)
|
||||
* ldo8 | XUSB, DP, MCU | 50000 | 800000 | 1050000 | 2800000 | 1.05V/2.8V (pcv)
|
||||
*/
|
||||
|
||||
/*
|
||||
|
|
@ -45,10 +45,10 @@
|
|||
*/
|
||||
|
||||
/*! MAX77620 partitions. */
|
||||
#define REGULATOR_SD0 0
|
||||
#define REGULATOR_SD1 1
|
||||
#define REGULATOR_SD2 2
|
||||
#define REGULATOR_SD3 3
|
||||
#define REGULATOR_SD0 0
|
||||
#define REGULATOR_SD1 1
|
||||
#define REGULATOR_SD2 2
|
||||
#define REGULATOR_SD3 3
|
||||
#define REGULATOR_LDO0 4
|
||||
#define REGULATOR_LDO1 5
|
||||
#define REGULATOR_LDO2 6
|
||||
|
|
@ -58,26 +58,40 @@
|
|||
#define REGULATOR_LDO6 10
|
||||
#define REGULATOR_LDO7 11
|
||||
#define REGULATOR_LDO8 12
|
||||
#define REGULATOR_MAX 12
|
||||
#define REGULATOR_CPU0 13
|
||||
#define REGULATOR_GPU0 14
|
||||
#define REGULATOR_CPU1 15
|
||||
//#define REGULATOR_GPU1 16
|
||||
//#define REGULATOR_GPU1 17
|
||||
#define REGULATOR_MAX 15
|
||||
|
||||
#define MAX77621_CPU_I2C_ADDR 0x1B
|
||||
#define MAX77621_GPU_I2C_ADDR 0x1C
|
||||
|
||||
#define MAX77621_VOUT_REG 0
|
||||
#define MAX77621_VOUT_DVS_REG 1
|
||||
#define MAX77621_CONTROL1_REG 2
|
||||
#define MAX77621_CONTROL2_REG 3
|
||||
|
||||
/* MAX77621_VOUT */
|
||||
#define MAX77621_VOUT_ENABLE BIT(7)
|
||||
#define MAX77621_VOUT_MASK 0x7F
|
||||
#define MAX77621_VOUT_0_95V 0x37
|
||||
#define MAX77621_VOUT_1_09V 0x4F
|
||||
#define MAX77621_VOUT_REG 0x00
|
||||
#define MAX77621_VOUT_DVS_REG 0x01
|
||||
#define MAX77621_CONTROL1_REG 0x02
|
||||
#define MAX77621_CONTROL2_REG 0x03
|
||||
#define MAX77621_CHIPID1_REG 0x04
|
||||
#define MAX77621_CHIPID2_REG 0x05
|
||||
|
||||
/* MAX77621_VOUT_DVC_DVS */
|
||||
#define MAX77621_DVS_VOUT_MASK 0x7F
|
||||
#define MAX77621_DVC_DVS_VOLT_MASK 0x7F
|
||||
#define MAX77621_DVC_DVS_ENABLE_SHIFT 7
|
||||
#define MAX77621_DVC_DVS_ENABLE_MASK (1 << MAX77621_DVC_DVS_ENABLE_SHIFT)
|
||||
|
||||
/* MAX77621_VOUT */
|
||||
#define MAX77621_VOUT_DISABLE 0
|
||||
#define MAX77621_VOUT_ENABLE 1
|
||||
#define MAX77621_VOUT_ENABLE_MASK (MAX77621_VOUT_ENABLE << MAX77621_DVC_DVS_ENABLE_SHIFT)
|
||||
|
||||
/* MAX77621_CONTROL1 */
|
||||
#define MAX77621_RAMP_12mV_PER_US 0x0
|
||||
#define MAX77621_RAMP_25mV_PER_US 0x1
|
||||
#define MAX77621_RAMP_50mV_PER_US 0x2
|
||||
#define MAX77621_RAMP_200mV_PER_US 0x3
|
||||
#define MAX77621_RAMP_MASK 0x3
|
||||
|
||||
#define MAX77621_FREQSHIFT_9PER BIT(2)
|
||||
#define MAX77621_BIAS_ENABLE BIT(3)
|
||||
#define MAX77621_AD_ENABLE BIT(4)
|
||||
|
|
@ -85,34 +99,50 @@
|
|||
#define MAX77621_FPWM_EN_M BIT(6)
|
||||
#define MAX77621_SNS_ENABLE BIT(7)
|
||||
|
||||
#define MAX77621_RAMP_12mV_PER_US 0x0
|
||||
#define MAX77621_RAMP_25mV_PER_US 0x1
|
||||
#define MAX77621_RAMP_50mV_PER_US 0x2
|
||||
#define MAX77621_RAMP_200mV_PER_US 0x3
|
||||
#define MAX77621_RAMP_MASK 0x3
|
||||
|
||||
/* MAX77621_CONTROL2 */
|
||||
#define MAX77621_FT_ENABLE BIT(4)
|
||||
#define MAX77621_DISCH_ENBABLE BIT(5)
|
||||
#define MAX77621_WDTMR_ENABLE BIT(6)
|
||||
#define MAX77621_T_JUNCTION_120 BIT(7)
|
||||
#define MAX77621_INDUCTOR_MIN_30_PER 0
|
||||
#define MAX77621_INDUCTOR_NOMINAL 1
|
||||
#define MAX77621_INDUCTOR_PLUS_30_PER 2
|
||||
#define MAX77621_INDUCTOR_PLUS_60_PER 3
|
||||
#define MAX77621_INDUCTOR_MASK 3
|
||||
|
||||
#define MAX77621_CKKADV_TRIP_DISABLE 0xC
|
||||
#define MAX77621_CKKADV_TRIP_75mV_PER_US 0x0
|
||||
#define MAX77621_CKKADV_TRIP_150mV_PER_US 0x4
|
||||
#define MAX77621_CKKADV_TRIP_75mV_PER_US_HIST_DIS 0x8
|
||||
#define MAX77621_CKKADV_TRIP_150mV_PER_US BIT(2)
|
||||
#define MAX77621_CKKADV_TRIP_75mV_PER_US_HIST_DIS BIT(3)
|
||||
#define MAX77621_CKKADV_TRIP_DISABLE (BIT(2) | BIT(3))
|
||||
#define MAX77621_CKKADV_TRIP_MASK (BIT(2) | BIT(3))
|
||||
|
||||
#define MAX77621_INDUCTOR_MIN_30_PER 0x0
|
||||
#define MAX77621_INDUCTOR_NOMINAL 0x1
|
||||
#define MAX77621_INDUCTOR_PLUS_30_PER 0x2
|
||||
#define MAX77621_INDUCTOR_PLUS_60_PER 0x3
|
||||
#define MAX77621_FT_ENABLE BIT(4)
|
||||
#define MAX77621_DISCH_ENABLE BIT(5)
|
||||
#define MAX77621_WDTMR_ENABLE BIT(6)
|
||||
#define MAX77621_T_JUNCTION_120 BIT(7)
|
||||
|
||||
int max77620_regulator_get_status(u32 id);
|
||||
int max77620_regulator_config_fps(u32 id);
|
||||
int max77620_regulator_set_voltage(u32 id, u32 mv);
|
||||
int max77620_regulator_enable(u32 id, int enable);
|
||||
int max77620_regulator_set_volt_and_flags(u32 id, u32 mv, u8 flags);
|
||||
#define MAX77621_CPU_CTRL1_POR_DEFAULT (MAX77621_RAMP_50mV_PER_US)
|
||||
#define MAX77621_CPU_CTRL1_HOS_DEFAULT (MAX77621_AD_ENABLE | \
|
||||
MAX77621_NFSR_ENABLE | \
|
||||
MAX77621_SNS_ENABLE | \
|
||||
MAX77621_RAMP_12mV_PER_US)
|
||||
#define MAX77621_CPU_CTRL2_POR_DEFAULT (MAX77621_T_JUNCTION_120 | \
|
||||
MAX77621_FT_ENABLE | \
|
||||
MAX77621_CKKADV_TRIP_75mV_PER_US_HIST_DIS | \
|
||||
MAX77621_CKKADV_TRIP_150mV_PER_US | \
|
||||
MAX77621_INDUCTOR_NOMINAL)
|
||||
#define MAX77621_CPU_CTRL2_HOS_DEFAULT (MAX77621_T_JUNCTION_120 | \
|
||||
MAX77621_WDTMR_ENABLE | \
|
||||
MAX77621_CKKADV_TRIP_75mV_PER_US | \
|
||||
MAX77621_INDUCTOR_NOMINAL)
|
||||
|
||||
#define MAX77621_CTRL_HOS_CFG 0
|
||||
#define MAX77621_CTRL_POR_CFG 1
|
||||
|
||||
int max77620_regulator_get_status(u32 id);
|
||||
int max77620_regulator_config_fps(u32 id);
|
||||
int max7762x_regulator_set_voltage(u32 id, u32 mv);
|
||||
int max7762x_regulator_enable(u32 id, bool enable);
|
||||
void max77620_config_gpio(u32 id, bool enable);
|
||||
void max77620_config_default();
|
||||
void max77620_low_battery_monitor_config(bool enable);
|
||||
|
||||
void max77621_config_default(u32 id, bool por);
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -17,8 +17,8 @@
|
|||
#ifndef _MAX77812_H_
|
||||
#define _MAX77812_H_
|
||||
|
||||
#define MAX77812_PHASE31_CPU_I2C_ADDR 0x31
|
||||
#define MAX77812_PHASE211_CPU_I2C_ADDR 0x33
|
||||
#define MAX77812_PHASE31_CPU_I2C_ADDR 0x31 // 2 Outputs: 3-phase M1 + 1-phase M4.
|
||||
#define MAX77812_PHASE211_CPU_I2C_ADDR 0x33 // 3 Outputs: 2-phase M1 + 1-phase M3 + 1-phase M4.
|
||||
|
||||
#define MAX77812_REG_RSET 0x00
|
||||
#define MAX77812_REG_INT_SRC 0x01
|
||||
|
|
@ -27,7 +27,15 @@
|
|||
#define MAX77812_REG_TOPSYS_INT_M 0x04
|
||||
#define MAX77812_REG_TOPSYS_STAT 0x05
|
||||
#define MAX77812_REG_EN_CTRL 0x06
|
||||
#define MAX77812_EN_CTRL_EN_M4 BIT(6)
|
||||
#define MAX77812_EN_CTRL_ENABLE 1
|
||||
#define MAX77812_EN_CTRL_EN_M1_SHIFT 0
|
||||
#define MAX77812_EN_CTRL_EN_M1_MASK (1 << MAX77812_EN_CTRL_EN_M1_SHIFT)
|
||||
#define MAX77812_EN_CTRL_EN_M2_SHIFT 2
|
||||
#define MAX77812_EN_CTRL_EN_M2_MASK (1 << MAX77812_EN_CTRL_EN_M2_SHIFT)
|
||||
#define MAX77812_EN_CTRL_EN_M3_SHIFT 4
|
||||
#define MAX77812_EN_CTRL_EN_M3_MASK (1 << MAX77812_EN_CTRL_EN_M3_SHIFT)
|
||||
#define MAX77812_EN_CTRL_EN_M4_SHIFT 6
|
||||
#define MAX77812_EN_CTRL_EN_M4_MASK (1 << MAX77812_EN_CTRL_EN_M4_SHIFT)
|
||||
#define MAX77812_REG_STUP_DLY2 0x07
|
||||
#define MAX77812_REG_STUP_DLY3 0x08
|
||||
#define MAX77812_REG_STUP_DLY4 0x09
|
||||
|
|
@ -46,11 +54,10 @@
|
|||
#define MAX77812_REG_BUCK_INT 0x20
|
||||
#define MAX77812_REG_BUCK_INT_M 0x21
|
||||
#define MAX77812_REG_BUCK_STAT 0x22
|
||||
#define MAX77812_REG_M1_VOUT 0x23
|
||||
#define MAX77812_REG_M1_VOUT 0x23 // GPU.
|
||||
#define MAX77812_REG_M2_VOUT 0x24
|
||||
#define MAX77812_REG_M3_VOUT 0x25
|
||||
#define MAX77812_REG_M4_VOUT 0x26
|
||||
#define MAX77812_M4_VOUT_0_80V 0x6E
|
||||
#define MAX77812_REG_M3_VOUT 0x25 // DRAM on PHASE211.
|
||||
#define MAX77812_REG_M4_VOUT 0x26 // CPU.
|
||||
#define MAX77812_REG_M1_VOUT_D 0x27
|
||||
#define MAX77812_REG_M2_VOUT_D 0x28
|
||||
#define MAX77812_REG_M3_VOUT_D 0x29
|
||||
|
|
@ -66,6 +73,8 @@
|
|||
#define MAX77812_REG_GLB_CFG1 0x33
|
||||
#define MAX77812_REG_GLB_CFG2 0x34
|
||||
#define MAX77812_REG_GLB_CFG3 0x35
|
||||
|
||||
/*! Protected area and settings only for MAX77812_REG_VERSION 4 */
|
||||
#define MAX77812_REG_GLB_CFG4 0x36
|
||||
#define MAX77812_REG_GLB_CFG5 0x37
|
||||
#define MAX77812_REG_GLB_CFG6 0x38
|
||||
|
|
@ -91,10 +100,6 @@
|
|||
#define MAX77812_ES2_VERSION 0x04
|
||||
#define MAX77812_QS_VERSION 0x05
|
||||
|
||||
#define MAX77812_VOUT_MASK 0xFF
|
||||
#define MAX77812_VOUT_N_VOLTAGE 0xFF
|
||||
#define MAX77812_VOUT_VMIN 250000
|
||||
#define MAX77812_VOUT_VMAX 1525000
|
||||
#define MAX77812_VOUT_STEP 5000
|
||||
#define MAX77812_BUCK_VOLT_MASK 0xFF
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -21,8 +21,9 @@
|
|||
#include <utils/types.h>
|
||||
|
||||
static u8 reg_5v_dev = 0;
|
||||
static bool batt_src = false;
|
||||
|
||||
void regulator_enable_5v(u8 dev)
|
||||
void regulator_5v_enable(u8 dev)
|
||||
{
|
||||
// The power supply selection from battery or USB is automatic.
|
||||
if (!reg_5v_dev)
|
||||
|
|
@ -32,6 +33,7 @@ void regulator_enable_5v(u8 dev)
|
|||
gpio_config(GPIO_PORT_A, GPIO_PIN_5, GPIO_MODE_GPIO);
|
||||
gpio_output_enable(GPIO_PORT_A, GPIO_PIN_5, GPIO_OUTPUT_ENABLE);
|
||||
gpio_write(GPIO_PORT_A, GPIO_PIN_5, GPIO_HIGH);
|
||||
batt_src = true;
|
||||
|
||||
// Fan and Rail power from USB 5V VDD.
|
||||
PINMUX_AUX(PINMUX_AUX_USB_VBUS_EN0) = PINMUX_LPDR | 1;
|
||||
|
|
@ -47,7 +49,7 @@ void regulator_enable_5v(u8 dev)
|
|||
reg_5v_dev |= dev;
|
||||
}
|
||||
|
||||
void regulator_disable_5v(u8 dev)
|
||||
void regulator_5v_disable(u8 dev)
|
||||
{
|
||||
reg_5v_dev &= ~dev;
|
||||
|
||||
|
|
@ -58,6 +60,7 @@ void regulator_disable_5v(u8 dev)
|
|||
gpio_output_enable(GPIO_PORT_A, GPIO_PIN_5, GPIO_OUTPUT_DISABLE);
|
||||
gpio_config(GPIO_PORT_A, GPIO_PIN_5, GPIO_MODE_SPIO);
|
||||
PINMUX_AUX(PINMUX_AUX_SATA_LED_ACTIVE) = PINMUX_PARKED | PINMUX_INPUT_ENABLE;
|
||||
batt_src = false;
|
||||
|
||||
// Rail power from USB 5V VDD.
|
||||
gpio_write(GPIO_PORT_CC, GPIO_PIN_4, GPIO_LOW);
|
||||
|
|
@ -70,7 +73,21 @@ void regulator_disable_5v(u8 dev)
|
|||
}
|
||||
}
|
||||
|
||||
bool regulator_get_5v_dev_enabled(u8 dev)
|
||||
bool regulator_5v_get_dev_enabled(u8 dev)
|
||||
{
|
||||
return (reg_5v_dev & dev);
|
||||
}
|
||||
|
||||
void regulator_5v_batt_src_enable(bool enable)
|
||||
{
|
||||
if (enable && !batt_src)
|
||||
{
|
||||
gpio_write(GPIO_PORT_A, GPIO_PIN_5, GPIO_HIGH);
|
||||
batt_src = true;
|
||||
}
|
||||
else if (!enable && batt_src)
|
||||
{
|
||||
gpio_write(GPIO_PORT_A, GPIO_PIN_5, GPIO_LOW);
|
||||
batt_src = false;
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -27,8 +27,9 @@ enum
|
|||
REGULATOR_5V_ALL = 0xFF
|
||||
};
|
||||
|
||||
void regulator_enable_5v(u8 dev);
|
||||
void regulator_disable_5v(u8 dev);
|
||||
bool regulator_get_5v_dev_enabled(u8 dev);
|
||||
void regulator_5v_enable(u8 dev);
|
||||
void regulator_5v_disable(u8 dev);
|
||||
bool regulator_5v_get_dev_enabled(u8 dev);
|
||||
void regulator_5v_batt_src_enable(bool enable);
|
||||
|
||||
#endif
|
||||
Loading…
Add table
Add a link
Reference in a new issue