Mascali/Picklock_RCM
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge hekate 5.1.4 changes

Browse source
This commit is contained in:
shchmue 2020-04-15 16:18:58 -06:00
parent a7d20c5814
commit 25ff127404
25 changed files with 277 additions and 152 deletions
Download patch file Download diff file Expand all files Collapse all files

31
source/soc/hw_init.c
View file

@ -1,6 +1,6 @@
/*
* Copyright (c) 2018 naehrwert
* Copyright (c) 2018-2019 CTCaer
* Copyright (c) 2018-2020 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -39,6 +39,7 @@
extern sdmmc_t sd_sdmmc;
extern boot_cfg_t b_cfg;
extern volatile nyx_storage_t *nyx_str;
/*
* CLK_OSC - 38.4 MHz crystal.
@ -78,8 +79,8 @@ void _config_gpios()
PINMUX_AUX(PINMUX_AUX_UART3_TX) = 0;
// Set Joy-Con IsAttached direction.
PINMUX_AUX(PINMUX_AUX_GPIO_PE6) = PINMUX_INPUT_ENABLE;
PINMUX_AUX(PINMUX_AUX_GPIO_PH6) = PINMUX_INPUT_ENABLE;
PINMUX_AUX(PINMUX_AUX_GPIO_PE6) = PINMUX_INPUT_ENABLE | PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_GPIO_PH6) = PINMUX_INPUT_ENABLE | PINMUX_TRISTATE;
// Set pin mode for Joy-Con IsAttached and UARTB/C TX pins.
#if !defined (DEBUG_UART_PORT) || DEBUG_UART_PORT != UART_B
@ -109,7 +110,7 @@ void _config_gpios()
gpio_output_enable(GPIO_PORT_X, GPIO_PIN_7, GPIO_OUTPUT_DISABLE);
// Configure HOME as inputs.
// PINMUX_AUX(PINMUX_AUX_BUTTON_HOME) = PINMUX_PULL_UP | PINMUX_INPUT_ENABLE;
// PINMUX_AUX(PINMUX_AUX_BUTTON_HOME) = PINMUX_INPUT_ENABLE | PINMUX_TRISTATE;
// gpio_config(GPIO_PORT_Y, GPIO_PIN_1, GPIO_MODE_GPIO);
}
@ -160,7 +161,7 @@ void _mbist_workaround()
// Enable specific clocks and disable all others.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_H) = 0xC0; // Enable clock PMC, FUSE.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) = 0x80000130; // Enable clock RTC, TMR, GPIO, BPMP_CACHE.
//CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) = 0x80400130; // Keep USB data ON.
//CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) = 0x80400130; // Keep USBD ON.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_U) = 0x1F00200; // Enable clock CSITE, IRAMA, IRAMB, IRAMC, IRAMD, BPMP_CACHE_RAM.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) = 0x80400808; // Enable clock MSELECT, APB2APE, SPDIF_DOUBLER, SE.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_W) = 0x402000FC; // Enable clock PCIERX0, PCIERX1, PCIERX2, PCIERX3, PCIERX4, PCIERX5, ENTROPY, MC1.
@ -184,6 +185,9 @@ void _mbist_workaround()
void _config_se_brom()
{
// Enable fuse clock.
clock_enable_fuse(true);
// Skip SBK/SSK if sept was run.
if (!(b_cfg.boot_cfg & BOOT_CFG_SEPT_RUN))
{
@ -217,10 +221,19 @@ void _config_se_brom()
void _config_regulators()
{
// Disable low battery shutdown monitor.
max77620_low_battery_monitor_config(false);
// Disable SDMMC1 IO power.
gpio_output_enable(GPIO_PORT_E, GPIO_PIN_4, GPIO_OUTPUT_DISABLE);
max77620_regulator_enable(REGULATOR_LDO2, 0);
sd_power_cycle_time_start = get_tmr_ms();
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CNFGBBC, MAX77620_CNFGBBC_RESISTOR_1K);
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_ONOFFCNFG1,
(1 << 6) | (3 << MAX77620_ONOFFCNFG1_MRT_SHIFT)); // PWR delay for forced shutdown off.
// Configure all Flexible Power Sequencers.
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG0,
(7 << MAX77620_FPS_TIME_PERIOD_SHIFT));
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG1,
@ -236,10 +249,10 @@ void _config_regulators()
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_GPIO3,
(4 << MAX77620_FPS_TIME_PERIOD_SHIFT) | (2 << MAX77620_FPS_PD_PERIOD_SHIFT)); // 3.x+
// Set vdd_core voltage to 1.125V
// Set vdd_core voltage to 1.125V.
max77620_regulator_set_voltage(REGULATOR_SD0, 1125000);
// Fix CPU/GPU after a Linux warmboot.
// Fix CPU/GPU after a L4T warmboot.
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO5, 2);
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO6, 2);
@ -256,9 +269,6 @@ void _config_regulators()
i2c_send_byte(I2C_5, MAX77621_GPU_I2C_ADDR, MAX77621_CONTROL2_REG,
MAX77621_T_JUNCTION_120 | MAX77621_FT_ENABLE | MAX77621_CKKADV_TRIP_75mV_PER_US_HIST_DIS |
MAX77621_CKKADV_TRIP_150mV_PER_US | MAX77621_INDUCTOR_NOMINAL);
// Enable low battery shutdown monitor for < 2800mV.
max77620_low_battery_monitor_config();
}
void config_hw()
@ -312,6 +322,7 @@ void reconfig_hw_workaround(bool extra_reconfig, u32 magic)
bpmp_mmu_disable();
bpmp_clk_rate_set(BPMP_CLK_NORMAL);
minerva_change_freq(FREQ_204);
nyx_str->mtc_cfg.init_done = 0;
// Re-enable clocks to Audio Processing Engine as a workaround to hanging.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) |= (1 << 10); // Enable AHUB clock.

8
source/soc/i2c.c
View file

@ -1,5 +1,6 @@
/*
* Copyright (c) 2018 naehrwert
* Copyright (c) 2018-2020 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -19,7 +20,7 @@
#include "i2c.h"
#include "../utils/util.h"
static u32 i2c_addrs[] = {
static const u32 i2c_addrs[] = {
0x7000C000, 0x7000C400, 0x7000C500,
0x7000C700, 0x7000D000, 0x7000D100
};
@ -121,6 +122,11 @@ int i2c_send_buf_small(u32 idx, u32 x, u32 y, u8 *buf, u32 size)
return _i2c_send_pkt(idx, x, tmp, size + 1);
}
int i2c_recv_buf(u8 *buf, u32 size, u32 idx, u32 x)
{
return _i2c_recv_pkt(idx, buf, size, x);
}
int i2c_recv_buf_small(u8 *buf, u32 size, u32 idx, u32 x, u32 y)
{
int res = _i2c_send_pkt(idx, x, (u8 *)&y, 1);

2
source/soc/i2c.h
View file

@ -1,5 +1,6 @@
/*
* Copyright (c) 2018 naehrwert
* Copyright (c) 2020 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -39,6 +40,7 @@
void i2c_init(u32 idx);
int i2c_send_buf_small(u32 idx, u32 x, u32 y, u8 *buf, u32 size);
int i2c_recv_buf(u8 *buf, u32 size, u32 idx, u32 x);
int i2c_recv_buf_small(u8 *buf, u32 size, u32 idx, u32 x, u32 y);
int i2c_send_byte(u32 idx, u32 x, u32 y, u8 b);
u8 i2c_recv_byte(u32 idx, u32 x, u32 y);